Power2Max NGeco Road Power Meter - SRAM
WARNING
This product Contains a Button/Coin Battery. A lithium battery can cause severe or fatal injuries in 2 hours or less if it is swallowed or placed inside any part of the body. Keep batteries out of reach of children. If you think batteries may have been swallowed or placed inside any part of the body, seek immediate medical attention.
Using a SRAM direct mount crankset on your Road-, CX- or Gravel bike? And you want to use a powermeter? You have come to the right place.
The NGeco Road SRAM power meter spider is the power meter for all cyclist who already use a SRAM crank set with three torque bolts (i.e.: Force22, Rival22 and S900 crank sets).
NOT SURE WHICH P2M POWER METER FOR ROAD IS RIGHT FOR YOU?
Check this guide - https://www.power2max.com/en/p2m-road-powermeter/
- SPECIFICATIONS -
Physical
- Weight: 160g / 163g / 172g (110 / 110 4-s / 130)
- Fitment options (BCD) - 110, 110 4-S (i.e. Shimano RD 4-bolt), 130
- Water Resistant: yes
Battery
- Type: CR2450 coin cell replaceable
- Life: up to 300 hrs
Data
- Metrics: power, cadence
- Power Accuracy: +/- 2%
- Torque: 0 - 250 Nm
- Power: 10 - 2999 W
- Cadence: 20 - 250 RPM
- Data Transmission: ANT+, BLE
- Active Temperature compensation: yes
- Calibration: automatic zero-point adjustment (no user calibration required)
Compatibility
- Crankset SRAM-Crankset with removable spider & 3-bolt interface (SRAM Power meter Ready is NOT compatible)**
- Fitment: recommend Loctite 243 or similar threadlocker
- Torque: 1 - 2nm
Other
- Manufacturer's Warranty: 5 years (NG model) / 2 years (NGeco model)
- INCLUDES -
- Powermeter
- Silicon cover
- Quickstart guide
**To check if your crankset is compatible, observe the back of the chainring. There should be three screws that connect the chainring onto the right crankarm. If that is the case, you can use one of our powermeters!
POWER2MAX WARRANTY INFORMATION
POWER2MAX guarantee their products to be free of manufacture defects, to the original purchaser, for 2 years.
This warranty does NOT cover normal wear and tear, incorrect installation, modification or products which have been otherwise tampered with, and crashed products.
All POWER2MAX products must be assessed by the manufacturer prior to warranty decisions being made.Dealers are not authorized to replace POWER2MAX products without prior approval or evaluation.If you have a POWER2MAX product that you believe should be considered for warranty, please take it back to the retailer you purchased from with your dated receipt – OR – contact POWER2MAX directly via their support page. https://www.power2max.com/en/warranty/
For more information and installation instructions, please refer to the following; https://www.power2max.com/en/faqs/
Start a warranty process
| Select model |
