SPECIAL NOTES
Low Insert casing allows for easier internal cable routing.

This Bottom Bracket allows fitment of the following systems...

• 386EVO (46 x 86.5mm) Shells to BB386 Cranks
• BBRright (46 x 79mm Offset) Shells to Factory Cervelo BBRight Cranks
• PF30 Shells (46 x 68/73mm) to BB30 Cranks
• PF30A Shells (46 x 73/83mm Offset) with factory Cannondale Cranks
• Use of all 46mm Shells - with use of aftermarket spacers

For special applications - please chat with our team or the fine folks at KOGEL.

SEAL OPTIONS
Cross Seals (Green)
Road Seals (Blue)
We always encourage and recommend the use of Cross seals where possible.

FITMENT
46mm diameter

SHELL WIDTH
68/73mm

COMPATIBILITY
BB30 Cranks, BB386 Cranks (with Spacers)

ABOUT
Kogel Hybrid bearings use premium grade Silicon Nitride (Si3n4) Bearings and premium hardened steel bearing races which are mirror polished to perfection. The result? A long lasting, smooth bearing which provides less resistance and is less prone to failures. These bearings are rated to the Grade 3 / ABEC 5 level - built to spin with minimal friction.

All Kogel bearings come with a "1 + 1" Warranty.
Year 1 - we employ the "very few questions asked" method...
Year 2 - we ask that a full service be undertaken to ensure contamination is not the cause of issue prior to processing a warranty claim.  We recommend following the Kogel bearings service manual, ref to resources tab.

Services are undertaken at a low cost and is something we recommend yearly anyway - a great way to keep your bearings happy and healthy.